HPE Smart Array P840ar/2GB FBWC 12Gb 2-port Internal SAS Controller For G9 P/N: 84847-001, 843199-B21
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
Add some general information about your delivery and shipping policies.
PE Smart Array P840ar Controller:
The HPE Smart Array P840ar Controller is a versatile Smart Array 12 Gb/s Serial Attached SCSI (SAS), PCI-Express (PCIe) 3.0 x8 RAID controller that delivers enterprise storage performance, increased internal scalability, and data protection for HPE ProLiant DL360 and DL380 Gen9 rack servers. It features 16 internal physical connections and enhances server uptime by providing advanced storage capabilities, including online RAID level migration between any RAID levels with flash-backed write cache (FBWC), global online spare, and pre-failure warning. This controller supports 16 drives without the need for a SAS Expander card and offers point-to-point connectivity with SSDs for lower latency. The HPE Smart Array P840ar Controller supports HPE Secure Encryption and is also backed by the HPE Smart Storage Battery, enabling multiple Smart Array controllers.
Specifications:
Key Features: | Storage interface (SAS/SATA) |
16 physical links across 2 x8 internal ports | |
12Gb/s SAS, 6Gb/s SATA technology | |
Mix-and-match SAS and SATA drives to the same controller | |
Support for SAS tape drives, SAS tape autoloaders and SAS tape libraries | |
2 GiBytes Flash-Backed Write Cache (FBWC) | |
PCI Express Gen3 x8 link | |
RAID 0, 1, 10, 5, 50, 6, 60, 10 ADM (Advanced Data Mirroring) | |
RAID or HBA mode | |
Legacy and UEFI boot operation | |
Up to 200 physical drives | |
Up to 64 logical drives | |
HPE SmartCache (license included) | |
HPE Secure Encryption (optional license) | |
HPE SSD Smart Path | |
VMware Virtual SAN certified | |
Rapid Parity Initialization (RPI) | |
Rapid rebuild | |
Drive Erase | |
Performance Optimization-Degraded Reads and Read Coalescing | |
Power Efficiency | |
Seamless upgrades to and from other HPE Smart Array controllers | |
Recovery ROM to protect against controller ROM corruption | |
Full-height, half-length Low-profile PCI Express form factor | |
Dimensions (excluding bracket): 6.6 in x 4.4 in x 0.6 in (16.8 cm x 11.1 cm x 1.5 cm) | |
Ports: | Internal: 16 SAS/SATA physical links across 2 x8 ports |
Performance: | 12Gb/s SAS (1200 MB/s theoretical bandwidth per physical lane) |
6Gb/s SATA (600 MB/s theoretical bandwidth per physical lane) | |
PCI Express Gen3 x8 link width2 GiBytes 72-bit wide DDR3-1866 Flash Back Write Cache provides up to 14.9GB/s maximum cache bandwidth | |
Read ahead caching | |
Write-back caching | |
Online Management Features: | Online array expansion |
Online capacity expansion | |
Online logical drive extension | |
Online RAID level migration | |
Online stripe size migration | |
Online mirror split, recombine, and rollback | |
Online active drive replacement | |
Online drive firmware upgrade | |
Online and high performance offline Rapid Parity Initialization (RPI) | |
Unlimited global online spares assignment | |
User selectable expand and rebuild priority | |
User selectable RAID level and stripe size | |
User selectable read and write cache sizes | |
Supports Predictive Spare Activation | |
Fault Prevention: | The following features offer detection of possible failures before they occur, allowing preventive action to be taken: |
S.M.A.R.T. (Self Monitoring Analysis and Reporting Technology) was first developed by HPE which detects possible hard disk failure before it occurs, allowing replacement of the component before failure occurs. | |
Drive Parameter Tracking monitors drive operational parameters, predicting failure and notifying the administrator. | |
Dynamic Sector Repairing continually performs background surface scans on the hard disk drives during inactive periods and automatically remaps bad sectors, ensuring data integrity. | |
Smart Array Cache Tracking monitors integrity of controller cache, allowing pre-failure preventative maintenance. | |
Fault Recovery: | Minimizes downtime, reconstructs data, and facilitates a quick recovery from drive failure |
Recovery ROM: This feature protects the user from a firmware image corruption by storing a redundant copy of the firmware image. If the active firmware image becomes corrupt, the controller will use the redundant firmware image and continue operating. | |
On-Line Spares: There is no limit to the number of spare drives that can be installed prior to drive failure. If a failure occurs, recovery begins with an On-Line Spare and data is reconstructed automatically.DRAM ECC detects and corrects data bit errors |
-
P/N
-
Merk
-
Garantie
-
Conditie
-
Gewicht
Payment & Security
Payment Options:
Your payment information is processed securely. We do not store credit card details nor do we have access to your credit card information.